This was bought from Bridgecom in the USA for $ 1,499.99 and shipped to Scotland with $165 shipping then £350 UK import duty So the price reflects this . This repeater has lay in its box for nearly 2yrs and is in the same condition as when sold just need to sell it as no longer needed .

Can be used with the MMDVM BOARD FROM REPEATER BUILDER https://www.bridgecomsystems.com/products/mmdvm

UHF (400-470 MHz, 70cm) - 40 Watts Continuous Duty
Designed and assembled in the USA

Introducing the ComLink™ BCR-40U/50V FM Repeater System by BridgeCom Systems, Inc. The BCR Repeater provides a feature rich repeater/base station. Packed with loads of RF power, this dual fan-cooled unit can become a community repeater, a 16 channel base station, manage a channel in an LTR® trunking system, and much more.

Applications On-Site Communications: Provide clear, reliable communications for settings such as golf courses, warehouses, office buildings, factories, colleges, and universities. Community Repeater: Each channel provides for quick and reliable decode of CTCSS and DCS. Trunking Systems: Excellent choice for interfacing LTR® trunking controllers. Feature Rich Base Station: 16 channels support up to 24 users per channel. Amateur Repeater: Both VHF and UHF versions operate in their respective amateur region of the spectrum.

Options External Peripherals: Easily connect a telephone interconnect, DC remote, tone/code panel, paging board, and telemetry devices. Link-Radio Ready: Connect a "Link-Radio" for cross-band applications and interoperability. GMRS Ready: Add a tuned internal duplexer.

Features • Built-In 10A Power Supply • Battery Backup with Built-in Charging Circuit • 13.8 Volts Output • Dual Cooling Fans • Front & External Speaker • 25-pin Accessory Connector: RX Discriminator Out External PTT In TX Audio In +13.8V Out (1A Max) COS Output • Keypad Lock • Adjustable Squelch • 12.5 kHz/25 kHz Channel • Over-the-Air Programmable • Adjustable RF Power • Transmitter Fine tuning • TX Timeout Timer • Per User Features: Air Time Logging Courtesy Tone (0, 500, 1000, 1500) TX Hang Timer Tone-In-Tail • Built-in CWID • CSQ Repeat • LTR® Compatible and Lo-Speed Data Ready • Windows® Based Programmer

General BCR-40U BCR-50V Number of Channels: 16 Operating Voltage: 13.8 V DC Nominal Channel Spacing: 12.5kHz / 25kHz Current Drain: 10A Max Weight: 18 lbs. Weight w/ Duplexer: 20 lbs. Frequency Range: 400-470 MHz 450-510 MHz 136-174 MHz Dim. (W x H x D): 19.0” x 3.5” x 13.5” Frequency Stability: +/-1.5 ppm +/- 1.5 ppm Operating Temp Range: -22° F to +140° F (-30° C to +60° C)

Receiver BCR-40U BCR-50V Local Oscillator: Low-side injection Low-side injection Sensitivity: 0.25 µV @ 12dB SINAD / 0.22 µV @ 10dB Squelch Threshold: Open 12dB SINAD/ Close 8dB SINAD Selectivity: 65dB @ 12.5kHz 70dB @ 25.0kHz Spurious Rejection: 70dB 70dB Intermodulation Rejection: 72dB @ 12.5kHz 72dB @ 25.0kHz Antenna Connector: N-Type Antenna Impedance: 50Ω Transmitter BCR-40U BCR-50V RF Output (w/o duplexer): Programmable 400-470 @ 0-40W 450-510 @ 0-40W adjustable 136-174 @ 0-50W adjustable Modulation: 160K0F3E, 11K0F3E Maximum Deviation: +/- 5kHz (25 kHz) +/- 2.5 kHz (12.5 kHz) FM Hum and Noise: 40dB @ 12.5kHz 45dB @ 25.0kHz Antenna Connector: N-Type Antenna Impedance: 50Ω

Windows® Based Programmer
Built-In 11.2A Power Supply
Battery Backup with Built-in Charging Circuit
Dual Cooling Fans
Front Panel Speaker
25-pin Accessory Connector
Adjustable Squelch
12.5 kHz/25 kHz Channel Spacing
Over-the-Air Programming and Maintenance via DTMF Tone Sequences
Built-in station CWID - Morse rate programmable 10-25 wpm
The MAX TX POWER when transmitting 40Watts is ~9 Amps
Quiescent draw is around ~250mA

PROGRAMING LEAD & SOFTWARE INCLUDED THIS WILL BE ON A USB DRIVE ONLY